KWB Knives
KWB Iron-Guard
KWB Iron-Guard
Finally the protection handmade knives deserve! Complete corrosion protection and unparalleled durability. KWB Iron-Guard is 100% food safe, approved by the FDA, easy to apply and lasts up to a year with daily use. For best results be sure to add the surface prep cleaning solution to your order - see options below.
KWB Iron-Guard:
- Corrosion resistance - The coating creates a perfectly sealed surface impervious to moisture and acidic juice which can rust carbon steel and damage surface finishes.
- Durability - Not only is this coating far more permanent than oil or wax, but it actually increases the surface hardness of the material coated, creating long term protection from corrosion, even preventing scratching and increasing edge retention.
- Non stick - The surface feels almost silky to the touch, with far less friction and hydrophobic properties, your knives and tools will perform better and be easier to clean.
- FDA Food safe - The coating bonds directly to the surface on a molecular level, unlike any other coating we've come across. This makes it incredibly durable, non reactive and completely safe for food preparation *once cleaned.
Instructions:
- Although very easy to apply, the quality of the coating is highly dependant on the surface preparation so please be sure to follow the steps carefully, and feel free to email us with any questions.
- You will need a clean well ventilated work area, and disposable gloves.
- Thoroughly clean and dry the surface.
- Clean again with the surface prep cleaning solution (see drop down options) on a paper towel or lint free cloth - on a microscopic scale, steel is full of pits and caves and is very porus. These pours need to be clean and coated for optimum protection. Our cleaning solution removes moisture as well as contaminants leaving behind a perfectly prepped surface. Leave to dry for 20 minutes, or gently heat with a hair dryer to ensure the cleaning solution has completely evaporated. Even if it looks dry on the surface, the pores can hold moisture and dirt like a cave in a rocky landscape.
- Apply the coating - soak a small piece of cotton or suede cloth - avoid polyester. It should be thoroughly saturated, but not dripping. Being very careful of any sharp edges, begin to work the coating into the steel. The coating may seem to evaporate quickly at first, this is it soaking in and reacting with the steel. Keep applying until you're left with an even surface that stays wet for a minute or two, finishing with long even stokes.
- Minimum bonding time of 24 hours in ideal conditions, longer - up to a week will improve performance.
- Rinse thoroughly with water to cure/neutralist the coating, and wash away any left over spirit residue. Water should now run off the surface with ease, if any areas do not bead water, try cleaning with dish soap and a soft non abrasive sponge, and dry with a soft towel. If you have any issues, either try the process again paying extra attention to the cleaning steps, or send us an email.
Couldn't load pickup availability
- Free next day delivery on orders over £150
Let customers speak for us
from 17 reviewsI purchased a custom knife from Korben. Korben took me through the process step by step from drawing different knife shapes and explaining the pros and cons to what designs I was looking at. This explanation included the steel types and the how the handle grains would catch the light. The knife arrived a few days ago and even the box it came in was a presentation itself. As I picked up the knife, I was quite impressed with the build quality and finish. The hamon line was remarkable and well defined. The edge almost fell through a sheet of paper by its own weight. I have many custom knives and this one is by far my new favorite.
Brilliant billets.
Brilliant customer service.
I've used dozens of them and they have all been superb.
Korben is a gent
Amazing knife maker, very friendly and knowledgeable. I had a custom knife made for me a year or so ago and its been a super reliable and beautiful knife. The experience was fantastic, very flexible and professional throughout the whole process. they also do amazing knife sharpening jigs!
The knives are so much more than anyone could ever ask for. Absolutely beautiful
I was excited to hear about KWB Knives as my husband really appreciates a good knife and I like to support local businesses. Korben was helpful and informative throughout the process of agreeing a design and production even though I was buying at entry level. This is a company very much worth supporting; you’ll have a great experience from first contact and every time you look at, let alone use, the knife for evermore. Thanks!
Sorry for the delay in review! Absolute 1 of a kind craftsman. You can see for yourself in the designs the style is outrageous but quality is just as good. Will take the time needed to make sure it’s right and won’t rush which is what you want when you’re looking at pieces like these. All the best.
A decision to get a custom kitchen knife made just for me came with some risk due to many choices out there. When I starting vetting Korben at KWB Knives it included checking out his work and style, of course. But, for me it was more about responses to my questions and how well he could connect to my vision. Well, he certainly has a knack and ability to listen well and then translate that to a perfectly forged to finish knife JUST for me!
He kept me updated from early design process, forging, grinding/polishing, handle material choices to assembly and finishes! As for performance, it is sharp as a razor, has the "just right" weight and balance and is of an appearance level that has me want to display it! Truly a fantastic experience with Korben at KWB Knives!
I was so glad I reached out to KWB Knives for the custom project I had in mind. From the beginning Korben was enthusiastic & supportive of what I wanted. Communication was excellent & his willingness to accommodate fine detail changes as the process went along was so welcome.
The build quality & aesthetic of the knife is just exceptional & hits all the specs I wanted.
‘What was this knife?’ I hear you say!
It was a screen accurate version of the Crocodile Dundee Bowie Knife 🐊
If you want a custom blade, KWB Knives should be at the top of your list!
Thank you Korben for the labour of love this became & it would be remiss of me not to also mention Korbens occasional colab partner Adam from Nord Knives who I understand spent a lot of time hand-sanding the blade. Your effort is also greatly appreciated!
All best wishes from a very happy customer!
Korben made a nakiri for me and made every aspect of the knife I asked for come to life! The finished product is truly something special👏🏼
I reached out to Korben after discovering him on Instagram and loved all of his amazing photos and knife work! I was looking for a custom knife for my wife and he really did he deliver exactly what we were looking for! He worked with us through every step to make sure we got exactly what we wanted. He is very meticulous and his attention to detail is exceptional. If anybody asked me where to get a custom knife I would recommend KWB Knives hands down best experience ever! Thanks Korben!
Ordered a custom knife a little while back and seriously not dissapointed. The craftsmanship is beautiful and and the knife is extremely sharp. As a proffesional chef of almost 10 years I've seen quite a few knifes and this one is among the best. KWB worked with me every step of the way from the length, the style, the edge, and even got to choose the wood for the handle too! 10 out 10 would recommend to anyone wanted a customized blade!
I absolutely love my knife. Thank you so much. Communication, professionalism, skill & quality all 5 star.
KWB are extremely professional, courteous and talented. The knives are handmade with such skilled craftmanship. Extremely knowledgable and would 100% recommend. Currently waiting on my 3rd knife to be made, would not go anywhere else.
I have a collection of knives both Japanese imports and British bespoke made and I have to say I was blown away from start to finish with the craftsmanship from KWB. My knife from KWB is head an shoulders above the rest. The knives are so unique, nothing like I had seen before. Razor sharp with a unique lightning bolt effect running through the blade, making a stunning and eye catching piece to add to my collection. I was kept updated well throughout the process and felt I could ask questions and make suggestions whenever needed. Korben is a master in his craft and would highly recommend investing a piece from him.
What can I say but, WOW!!
The is is my second knife from KWBKnives and I can honestly say, they are my favourite knives (I have over 800!!) They really are at a point where art meets functionality! They have no issues with being thrown in at the deep end and coming out gleaming. The shell pattern and grain structure are a pleasure just to look at!
The edge strength and sharpness retention is amazing. I haven’t even had to dress them up with a strop after a use yet. They’re still popping the hairs off of my arm.
I cannot sing Korben’s praise enough! From his attention to detail, to his involvement with you in the process and listening to all of your requests. He also has an encyclopaedic knowledge of suggestions and he isn’t afraid to try things. His handles fit so well in the hand, that they make it a pleasure and ease to work with.
I’ve already got a deposit in for #3 and I cannot wait to work with him and see what amazing creation he comes forth with!
Thank you Korben!!
Subscribe to our emails
Be the first to know about new items and exclusive offers.